FOCUS II MRIDER 28B W242 OBC | Nilfisk Official Website

Focus II MicroRider

Rider Floor Scrubbers

Please fill out the form, and we'll get back to you as soon as possible.

Spinner

FOCUS II MRIDER 28B W242 OBC

Technical specifications

  • Model No
    56382630
  • Scrub head type
    BOOST
  • Scrub path
    28 in (771 mm)
  • Capacity
    21 gal (80 L)
  • Productivity at 3.7 mph
    45,484 sq ft/hr (4,226 sq m/hr)
  • Max. speed
    3.7 mph (6 km/hr)
  • Brush pressure
    Setting 1 = 65 lb (30 kg) / Setting 2 = 105 lb (48 kg)
  • Brush speed (RPM)
    2,250 RPM
  • Brush motor (W)
    0.75 hp (560 W)
  • Vacuum motor
    0.56 hp (420 W)
  • Vacuum airflow
    55.3 CFM (26.1 L/Sec)
  • Vacuum waterlift
    57 in (14.2 KPA)
  • Water flow (l/min.)
    0 - 0.8 gpm (0 - 3.0 L/min)
  • Min. turn-around aisle width (CM)
    59 in (150 cm)
  • Max. ramp climbing
    16 degrees
  • Squeegee width
    35 in (89 cm)
  • Voltage (V)
    24 VDC
  • Power source
    (4) 6 Volt batteries (wet acid and AGM maintenance-free)
  • Battery charger
    24 VDC onboard
  • Maximum running time
    3.5 hours
  • Dimensions (W/O Squeegee)
    53.5 x 28.7 x 48.4 in (136 x 73 x 123 cm)
  • Weight without batteries
    401 lb (182 kg) w/ empty tanks
  • Max. weight (full solution tank and largest batteries)
    1,005 lb (456 kg)
  • Approvals
    ETL, CSA
  • Ip protection class
    IPX3
  • PSI Front Tire with Operator and Full Tank
    72.5 psi (0.5 N/sq mm)
  • PSI Rear Tires with Operator and Full Tank
    130.5 psi (0.9 N/ sq mm)
  • Sound pressure level EN ISO 11201: 1995
    High Setting = 65 dB A / Low Setting = 61 dB A
  • Quiet mode
    Included
  • Safe-T-Steering feature
    Included
  • Thermal overload protection
    Included
  • Superior Line of Sight
    Included
  • Security Key Switch
    Included
  • SafetyGlide Deck
    Included
  • One touch control panel
    Included
BluePrintSchema